Cypax - elektronik komponenter

Electrolube ER2188 Epoxy Resin Black
ER2188 is a UL approved, general purpose, two-part potting and encapsulating compound. The system utilises
a hardener free of DDM or other aromatic amines. The flame retardant technology used is of a clean type
leading to relatively low toxicity fumes and low smoke emission.

Electrolube ER2188 Highlights
General purpose resin ideal for many applications; cost effective protection
UL approved; UL94 V-0 flame retardancy rating
Excellent electrical properties; offers protection in a wide range of conditions
Does not contain abrasive fillers; low wear on dispensing machinery
Shelf life 18 months

Electrollube ER2188 Data of Cures System:
Thermal Conductivity (W/m.K) 0.91
Cured Density (g/ml) 1.69
Temperature Range (°C) -40 to +120
Max Temperature Range (Short Term (°C)/30 Mins)
(Application and Geometry Dependent) +140
Relative Thermal Index (°C) (UL File #E100107) +130
Dielectric Strength (kV/mm) 10
Volume Resistivity (ohm-cm) 1014
Shore Hardness D85
Colour (Mixed System) Black
Flame Retardancy Yes
Tensile Strength (MPa) 50
Compressive Strength (MPa) 120
Deflection Temperature (°C) 50
Coefficient of Expansion (ppm/°C) 40
Loss Tangent @ 50 Hz 0.04
Permittivity @ 50 Hz 4.00
Comparative Tracking Index >850 Volts
Water Absorption (9.7mm thick disk, 51mm diameter)
10 days @ 20ºC / 1 hour @ 100ºC < 0.5% / < 1%
Elongation At Break 0.4%

Cypax er importør og distributør af Electrolube produkter

Køb via Web, tlf. 9710 1188 eller mail til mail@cypax.dk. Fandt du ikke det du søgte eller ønsker du tilbud på større kvantitet/årsbehov, så hører vi gerne fra dig.

Sikkerhedsdatablad kan rekvireres på mail@cypax.com

ER2188 er en general purpose sort indstøbningsmasse til elektornik.Excelent all round beskyttelse af det indstøbte. Hårdhed D85, Viskositet 9000 mPa. Lagerholdbarhed 18 måneder
ER2188RP250GE leveres i 250 g mixerposer. UL94 V-0 godkendt.
Der tages forbehold for told-, pris- og valutaændringer.